Driver Installation Requirements; Hardware Requirements; Memory Requirements; Software Requirements - 3Com ATMLINK 155 PCI User Manual

Pci network interface cards
Table of Contents

Advertisement

Driver Installation Requirements

Please confirm that the following installation requirements
are met before installing and configuring the network driver.

Hardware Requirements

File server with a PCI bus running Novell NetWare version 3.12
or 4.x
3.5-inch floppy disk drive
At least one 3Com ATMLink NIC installed in the system

Memory Requirements

64 MB of system memory recommended for each installed
ATMLink NIC

Software Requirements

3Com ATMDisk diskette for Novell NetWare
Before installing the driver, review the README.TXT document
included on the ATMDisk diskette.
3Com strongly recommends that your Novell network
operating system be updated with the most recent patches
and updates available from Novell technical support
(www.novell.com).

NIC Information Requirements

The names of the ELANs to be configured on each ATMLink NIC
IP address and subnet mask of each LEC using TCP/IP
The MAC address and PCI slot numbers of installed 3Com
ATMLink NICs are not used in the NetWare driver installation,
but they can be obtained by using the diagnostic utility (see
Chapter 6 for details).
Driver Installation Requirements
4-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atmlink 155

Table of Contents