Link LED
The state of the Link LED indicates the ATMLink NIC operating
status. Table 6-3 explains the possible LED states.
Table 6-3 LED Activity
LED State
Slow blinking
Lit
Off
The LED of a standby NIC does not light unless the NIC changes
to active status.
Explanation
The operating system is loading the drivers and
activating the NIC.
A diagnostic test is being run.
A good link is established with the ATM switch.
A link with the ATM switch has not been established.
The NIC is a standby NIC.
The driver is not loaded.
Link LED
6-19