Nic Mode Dialog Box; Total Number Of Elans Dialog Box - 3Com ATMLINK 155 PCI User Manual

11 Click Yes if you want the 3Com driver installed on the
indicated NIC. Otherwise, click No.
If you click Yes, the NIC Mode dialog box appears, as shown in
Figure 3-6. If you click No, the NIC Installation dialog box
reappears for the next discovered ATMLink NIC.
To correlate the PCI bus and slot number with a physical NIC,
run the 3Com ATMLink diagnostic utility.
Figure 3-6 NIC Mode Dialog Box
12 Click Active to make the identified NIC an active NIC, or click
Stand-by to make it a standby NIC (resilient server link).
If you select Stand-by, the NIC Installation dialog box
reappears for the next discovered 3C975 ATMLink NIC.
If you select Active, the Total Number of ELANs dialog box
appears, as shown in Figure 3-7.
Figure 3-7 Total Number of ELANs Dialog Box
13 Enter the number of ELANs you require on the indicated
NIC, and click OK.
The maximum number of ELANs per NIC is 16.
Installing the Network Driver 3-11