Removing An Lec From Netware - 3Com ATMLINK 155 PCI User Manual

4-26 C 4: N W
HAPTER ET

Removing an LEC from NetWare

To remove an LEC from the AUTOEXEC.NCF file, follow these
steps:
1 From the system prompt, enter the command:
load install
The Installation Options screen shown in Figure 4-1 appears.
2 Select NCF files options.
This opens the AUTOEXEC.NCF file for editing.
3 Delete the load and bind commands of the ELAN that you
want to remove.
The 3C975.LAN driver name can appear in either the
load or bind commands as follows:
load 3c975.lan cardnum=1
frame=ethernet_802.2 linktype=1 channel=1
name=atm_1 elan=elan3372_1 vpivci=2
SIG_VERSION=1 max_frame_size=1514
;
bind ipx atm_1 net=6
4 Save and exit the AUTOEXEC.NCF file.
5 Exit the NetWare install utility.
The load order of the driver determines which physical NICs are
bound to which drivers. Changing the sequence of load
commands in the AUTOEXEC.NCF may necessitate changing
the cabling of the physical NICs. See the section "NetWare Card
Numbers and Multiple Physical NICs" for further information.
S D I
ARE ERVER RIVER NSTALLATION