Atml Ink Tility; Installing And Running The Atmlink Utility For Windows Nt - 3Com ATMLINK 155 PCI User Manual

5
ATML
This chapter describes the Windows NT and Novell NetWare
versions of the 3Com ATMLink utility.
The ATMLink utility reads and displays read-only ELAN
connection statistics and NIC configuration parameters.
Active connection statistics are updated every 5 seconds. The
utility can also reset the network driver of individual NICs.
Installing and Running the ATMLink Utility for
Windows NT
The ATM utility is shipped in the root directory of the
ATMDisk diskette for Windows NT as the file ATMUTIL.EXE.
The ATMLink utility files are copied automatically to the
System32 subdirectory during driver installation.
To run the ATMLink utility, perform the following procedure:
1 Add a new Program Item and ATMLink icon in the
Program Group of your choice.
2 Double-click the ATMLink icon to launch the ATMLink utility.
The ATMLink utility windows appears, as shown in Figure 5-1.
U
INK TILITY