Table of Contents
Advertisement
3-14
C
3: W
HAPTER
INDOWS
Table 3-1 3C975 ATMLink NIC Installation Configuration Parameters (continued)
Range of Values
Field
(Defaults in Bold)
ELAN Parameters (specific to each ELAN)
ELAN Name
0- to 32-character
ASCII string
Traffic Shaping
1–155 Mbps
LE Configuration
Automatic using
Mode
ILMI
Automatic with
specific LECS
Manual with specific
LES
LECS ATM Address
ATM Forum
Well-known Address
LES ATM Address
No default
To configure NICs and ELANs, follow these steps:
1 Select the NIC that you want to configure from the
ATMLink NIC list box in the ATMLink Installation window.
You can configure the NICs in any order that you wish.
2 To make the selected NIC a standby NIC, select one or
more active NICs.
Eligible active NICs appear in the Resilient Server Link box.
If you make a NIC a standby NIC, no further configuration is
necessary. Proceed to step 7.
NT D
I
RIVER
NSTALLATION
Description
ELAN names must match ELAN names
configured on the ATM switch. ELAN
names are case-sensitive.
Sets the maximum bandwidth available
to an ELAN.
Select Automatic using ILMI for ILMI
service.
Select Automatic with specific LECS to
connect with a LECS different from that
specified by ILMI.
Select Manual with a specific LES to
bypass the LECS and connect directly
with a LES of known address.
Enter the 20-byte network address of
the target LECS if it does not use the
ATM Forum Well-known Address.
Enter the 20-byte network address of
the target LES.
Advertisement
Table of Contents
