Table of Contents
Advertisement
ATMLink Utility Menu Options
Use the arrow keys to select from the following options:
NIC Information
VCC Statistics
ELAN Statistics
Reset NIC
Quit
Press [Enter] to display the selected information.
NIC Information
The NIC Information screen, as shown in Figure 5-8, displays
the configuration parameters of the selected physical NIC.
The bus number, slot number, and IRQ values are set by the
system BIOS. All other values are set through the install utility
or by manually editing the AUTOEXEC.NCF file. See Chapter 4
for details.
Figure 5-8 NetWare NIC Information Screen
ATMLink Utility Menu Options
5-9
Advertisement
Table of Contents
