Part Two: Nic And Elan Configuration - 3Com ATMLINK 155 PCI User Manual

Driver Installation Summary for Experienced Users
Part Two: NIC and ELAN Configuration
After all the 3Com ATMLink NICs have been detected, the
driver files copied, and the number of ELANs specified, the
3Com ATMLink Installation window appears.
1 For each installed 3Com ATMLink NIC, set the following
global NIC parameters (these are the same for all NICs in
the system):
VPI/VCI Range
Signaling Version
2 For each installed 3Com ATMLink NIC, set the following local
NIC parameters (these can vary with each NIC in the system):
LAN Type
ILMI VPI/VCI
Maximum Frame Size
Resilient Server Links
All of the above parameters except resilient link assignments
must match the ATM switch settings. The default values work
for most installations.
3 For each ELAN, set the following parameters:
ELAN Name
Peak Rate
LE Configuration Mode
4 Click Save & Exit in the 3Com ATMLink Installation window.
5 Click OK in the Network Settings window.
6 Configure the IP parameters for each ELAN if IP is used.
Enter dummy IP values for each standby NIC.
7 Restart Microsoft Windows NT.
3-7