Configuring The Tcp/Ip Network Interface - 3Com ATMLINK 155 PCI User Manual

Configuring LECs and Resilient Server Links
To configure LECs using the NetWare install program,
perform the following procedure:
1 Select Select/Modify driver parameters and protocols at the
bottom of the ELAN Configuration screen, as shown in
Figure 4-7.
The highlight bar moves to the TCP/IP option in the
Protocols box.
2 To add a protocol, select the desired protocol from the
Protocols box.
IPX is the default protocol. If you select TCP/IP, the dialog box
shown in Figure 4-8 appears.
Figure 4-8 Configuring the TCP/IP Network Interface
3 Edit the TCP/IP information as follows:
a Enter the IP address.
b Enter the IP mask.
c Press [Enter] to continue.
4-13