Table of Contents
Advertisement
6-18
C
6: D
HAPTER
IAGNOSTICS AND
RJ-45 Loopback Plug
To construct an external loopback plug for use in testing the
unshielded twisted-pair version of the ATMLink PCI NIC
(3C975-UTP), use an RJ-45 unshielded male connector.
Wire the loopback plug so that the transmit output of the
NIC (connector pins 1 and 2) is directly wired to the NIC's
receive input (connector pins 7 and 8, respectively), as shown
in Figure 6-12. See Appendix A for a complete table of pinouts
for the 3C975-UTP NIC.
Transmit (–) 2
Transmit (+) 1
Figure 6-12 UTP External Loopback Plug
T
ROUBLESHOOTING
Receive (+) 7
Receive (–) 8
RJ-45 unshielded
male connector
Advertisement
Table of Contents
