3Com SL-3055 Getting Started Manual

11a/b/g Wireless PCI Adapter
Model Number : SL-3055
3C Number : 3CRDAG675B

Installation Steps

This PCI Adapter operates with Windows XP and Windows 2000.
1. Turn down your computer, assembly 3Com PCI adapter with your computer then connect PCI with
Antenna connector.
2. With the computer on and Windows running, insert the Installation CD into the CD-ROM drive. The
auto-start feature starts the installation. If nothing happens within five seconds, click Start > Run
and type d:\setup.exe (where d: is your CD-ROM drive).
3. Your computer goes through a brief installation process during which it displays several windows
indicating what is currently installing.
Respond to the prompts as they appear.
n
If a Windows errror message displays, select the option to continue the installation.
n
You may receive prompts for the Windows installation CD. Insert the CD for your Windows
operating system and indicate the correct path.

US-Radio Frequency Requirements:

This device must not be co-located or operated in conjunction with any other antenna or transmitter.
This device is for indoor use only when using channels 36,40,44 or 48 in the 5.15 to 5.25 GHz frequency range
High power radars are allocated as primary users of the 5.15 to 5.35 GHz, 5.47 to 5.725GHz and 5.725 to
5.85GHz bands. These radar stations can cause interference with and/or damage this device.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Getting Started Guide