Table of Contents
Advertisement
3-16
C
3: W
HAPTER
INDOWS
5 Select an ELAN name and then click Configure ELAN.
The ELAN Configuration window appears, as shown in
Figure 3-9.
Figure 3-9 ELAN Configuration Window
a Enter the ELAN name.
The ELAN names should match the ELAN names configured
on the ATM switch, LECS, or LES. In many ATM installations
the ELAN name is supplied by the LES.
b Select the LE configuration mode.
Select Automatic using ILMI to use the ATM switch-based
Interim Local Management Interface service (ILMI) to
connect to the LES.
Select Automatic with specific LECS if you wish to contact
an LECS not identified by ILMI. Enter the 20-byte ATM
address of the specific LECS if it does not use the default
ATM Forum Well-known Address. To reinstate the default
value, click the Well-known LECS Address button.
Select Manual with specific LES to connect directly to the
LES. Enter the 20-byte ATM address of the LES.
NT D
I
RIVER
NSTALLATION
Advertisement
Table of Contents
