Table of Contents
Advertisement
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 4, "Parts listing," on page 41 to determine which components are customer replaceable units
(CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
Trained service technician.
Error code
Description
3008001
System configuration invalid.
3008002
Date, time, or both are incorrect.
Action
1. Run the Setup utility (see "Using the Setup
utility" on page 21). Select Load Default Settings
and save the settings.
2. Reseat the following components one at a time in
the order shown, restarting the server each time:
v Battery (see "Removing the battery" on page
58 and "Installing the battery" on page 60).
v Expansion cards (see "Removing an I/O
expansion card" on page 71 and "Installing an
I/O expansion card" on page 75).
3. Replace the following components one at a time
in the order shown, restarting the server each
time:
v Battery (see "Removing the battery" on page
58 and "Installing the battery" on page 60).
v Expansion cards (see "Removing an I/O
expansion card" on page 71 and "Installing an
I/O expansion card" on page 75).
v (Trained service technician only) Replace the
system board (see "Removing the
system-board assembly" on page 97 and
"Installing the system-board assembly" on
page 98)
1. Run the Setup utility (see "Using the Setup
utility" on page 21). Select Load Default Settings
and save the settings.
2. Reseat the following components one at a time in
the order shown, restarting the server each time:
v Battery (see "Removing the battery" on page
58 and "Installing the battery" on page 60).
v Expansion cards (see "Removing an I/O
expansion card" on page 71 and "Installing an
I/O expansion card" on page 75).
3. Replace the following components one at a time
in the order shown, restarting the server each
time:
v Battery (see "Removing the battery" on page
58 and "Installing the battery" on page 60).
v Expansion cards (see "Removing an I/O
expansion card" on page 71 and "Installing an
I/O expansion card" on page 75).
v (Trained service technician only) Replace the
system board (see "Removing the
system-board assembly" on page 97 and
"Installing the system-board assembly" on
page 98)
161
Chapter 6. Diagnostics
Advertisement
Table of Contents
