Figure 82. Reset Snmp V3 - Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual

Note: For more information regarding SNMP v3 support for the installed Unified Firmware
Update (UFU), refer to the Unified Firmware Update (UFU) Release Notes .
To activate the SNMP v3 user account, configure the authentication and privacy settings
on this screen. First, select the authentication protocol and set the Authentication
passphrase. The authentication protocol is used by the management console to
authenticate the user account. Select either Secure Hash Algorithm (SHA) or Message-
Digest Algorithm 5 (MD5). By default, SHA is selected. Next, select the Privacy protocol
and assign the privacy passphrase. The privacy protocol is used to encrypt the SNMP data.
Select either DES, AES, or none. By default, none is selected.
Reset SNMP V3
The Reset SNMP v3 screen enables an IT administrator to delete all SNMP v3 users and
recreate all internal-chassis management users. Use this procedure if an outside SNMP
tool has modified or deleted the internal-chassis management users. This procedure may
take up to a minute to complete. To reactivate the SNMP v3 , go to the SNMP v3 settings
screen.
®
Intel Modular Server System User Guide

Figure 82. Reset SNMP v3

125