Figure 87. Syslog Notification Setting - Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual

Steps to configure the Intel
syslog server
1. Click Settings > Notifications in the left navigation panel.
2. Enter the Syslog Server Address.
3. Enter the SysLog server port number.
4. Select the protocol used by the syslog server (UDP or TCP). The syslog server must
support either syslogd or syslog-ng logging using either UDP (User Datagram
Protcol) or TCP (Transmission Control Protocol).
5. Enter message format. The default format is as follows:
— Event Description
— Component
— Event Policy information including detailed description and action information
6. Select the System Message Facility.
7. Select the Application Message Facility.
8. Select the Switch Message Facility.
9. Select the Storage Message Facility.
10. Select the Chassis Message Facility.
11. Click Save Changes to save the changes in the settings.
130
®
Management Module to forward system events to an external

Figure 87. SYSLOG Notification Setting

®
Intel Modular Server System User Guide