Configuring Nbxtsp On The Server - 3Com 3C10402B Administrator's Manual

Configuring
NBXTSP on the
Server
Users — Select the WAV phones and the ATA ports that are
■
connected to the third-party messaging system.
Call Coverage — Set to voice mail.
■
c Click Apply.
5 Modify the Voice Mail Extensions List:
1 Click Dial Plan > Extension Lists.
2 Click *0003 VoiceMail to display the Modify window.
3 To add a voice mail extension, use the Membership list:
a If the list does not include any voice mail extensions, click the check
boxes next to the voice mail extension that you want to add to the list.
b If the list already has members, click Show all to display a list of voice
mail extensions that you can add to the membership.
Note: You can toggle between the Show all and Show members only
buttons to display voice mail extensions that have membership in the list
and the voice mail extensions that are not members of the list but which
you can add to the list, and to confirm your changes.
4 Click OK.
On the third-party messaging server, you must add the WAV extensions
to the NBX TAPI Control Panel. If your third-party messaging system
needs TAPI messages from Analog Terminal Adapter devices or 3Com
telephones, you must also add these devices to the NBX TAPI Control
Panel.
Update the devices in the NBX TAPI Control Panel:
1 WinNT — On the server, select Control Panel > Telephony >
Telephony Drivers > NBX TAPI Service Provider.
Win2K — On the server, select Control Panel >
Phone and Modem Options > Advanced > NBX TAPI Service Provider.
2 Click Configure and add the extension numbers.
3 Click OK.
You are now ready to install your third-party messaging software. See
your application's documentation for installation and configuration
instructions.

Configuring NBXTSP on the Server

449