Speed Dials - 3Com 3C10402B Administrator's Manual

Networked telephony systems
Hide thumbs Also See for 3C10402B:
Table of Contents

Advertisement

Internet IP line ports and CO (central office) line ports must never be
assigned to the same extension list because they use very different dial
plans. Conventional practice is to use 9 for external switched network
(PSTN) connections and 8 for external IP network connections.
Calls to other NBX systems (or PBX systems) can include a destination
extension. This example represents a call to an extension (273) on a
remote NBX system that has an H.323 ConneXtions gateway:
8192
The # sign tells ConneXtions to "dial now." The last asterisk,
terminates the IP address, but ConneXtions cannot dial the number until
it sees the "# sign," or until 4 seconds pass after the last digit. In the
preceding example, the IP address (192.168.1.15) and the extension are
presented to the device as the "called party."
The # sign also precedes the extension as shown below. This allows the
ConneXtions gateway to complete the IP connection before it presents
the remaining digits to the remote terminal:
8192
Both configurations produce the same result when dialing into another
NBX system; however, other PBX systems can be position-sensitive. If you
are not sure, use the first format with the # sign after the extension.

Speed Dials

Your telephone system has a speed dial capability that offers a quick way
to dial frequently called numbers. Each telephone is capable of accessing
199 previously stored dial sequences with up to 30 characters in each
sequence. These sequences can represent switched network numbers or
Internet addresses. Special 3-digit speed dial numbers specify each dial
sequence.
Speed dial numbers must be preceded by the "Feature" button when
entered from a telephone. This button distinguishes speed dial numbers
from ordinary extensions that use the same three digits.
Speed dial numbers can be system-wide or personal. System speed dial
numbers (700-799) apply system-wide and are programmed by the
system administrator. Personal speed dial numbers (601 through 699)
apply only to an individual telephone; they are programmed by its owner.
168
1
15
273#
*
*
*
*
168
1
15#273
*
*
*
Placing Calls
493
,
*

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V3000 analogV3000 briV3001rV5000Nbx 100

Table of Contents