Adding An Analog Terminal Adapter (Ata); Modifying An Analog Terminal Port; Removing An Analog Terminal Adapter - 3Com 3C10402B Administrator's Manual

Adding an Analog
Terminal Adapter
(ATA)
Modifying an Analog
Terminal Port
Removing an Analog
Terminal Adapter
To determine the extension assigned to any port on a 3C10117C ATC:
1 Click Telephone Configuration > ATA.
2 Look for the combination of MAC address and port number that you
want. The extension associated with the port is in the first column
(Extension).
After you have added the Analog Terminal Card, you can configure the
parameters for each of the four ports. See
Terminal Port" on
To add an Analog Terminal Adapter (ATA) to the system:
1 Click Telephone Configuration > ATA.
2 Click Add.
3 Complete the fields, as necessary. See the online Help for more
information.
4 Click Apply to add the new ATA to the system.
5 Repeat as necessary to add more ATAs.
6 When you are finished adding ATAs, click OK.
You can modify the configuration of an Analog Terminal Card port or a
single-port ATA at any time.
To modify an analog device configuration:
1 Click Telephone Configuration > ATA.
2 Click the extension of the device that you want to modify.
3 Modify the fields, as necessary. See the online Help for more information.
4 Click Apply to effect the changes.
5 Click OK.
You can remove either an Analog Terminal Adapter (ATA) or one of the
ports on an Analog Terminal Card (ATC) from the system at any time. Any
device connected to the ATA is also removed from the system.
Connecting and Managing Analog Devices
page 127.
"Modifying an Analog
127