How Call Timer Works With Other Telephone Features - 3Com 3C10402B Administrator's Manual

How Call Timer
Works With Other
Telephone Features
Call Timer
■
Music On Hold
■
Music on Transfer
■
NBX Messaging
■
IP Messaging or Third-Party Messaging
■
URL for user access to IP Messaging or third-party messaging
■
Enable SIP
■
To configure system-wide settings:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System-Wide Settings > Enable Features System-Wide.
3 See the online Help for detailed information about the settings and how
to modify them.
Table 5 summarizes how Call Timer works with other PBX-type features.
Table 5 Call Timer Behaviors
Feature Description
Internal Call The call duration displays on the originating telephone when the
telephone user finishes dialing the destination number. The call
time increments while the called number is ringing.
Call Timer does not work if the caller enters an invalid internal
extension.
External Call Call Timer behavior for an external call is the same as that of an
internal call except in these cases:
■
■
In these cases, the call time continues to advance.
Hold When you put a call on hold, the system hides the Call Timer
display. However, the Call Timer count continues to increment
during the time that the call is on hold. When you take the call off
hold, the Call Timer reappears.
If the caller enters an invalid external number
If the telephone of the called number is busy
Enable Features System-Wide 31