3Com 3C10402B Administrator's Manual page 309

Dial Plan Configuration File Commands 309
Example: This example command creates, in route table 3, entry 1
and defines extension list *0003 as the destination for this route entry.
Extension list *0003 contains the voice mail extensions/ports.
DestinationRouteEntry Create 3 1 *0003
DestinationRouteOperati Syntax
on Create
DestinationRouteOperation Create nRouteId nEntryId nOperId
szOperation szValue
Description Creates a digit manipulation operation for a destination
route entry. If the specified digit manipulation operation already exists,
this command overwrites it with the new information. During routing the
system processes the entire list of operations in ascending nOperId order
(nOperId 1 first).
Arguments
— An integer in the range 1 through 32768.
RouteId
— An integer in the range 1 through 32768 specifying the
nEntryId
destination route entry to which this operation applies.
— An integer in the range 1 through 32768. The system
nOperId
processes the list of operations in ascending nOperId order.
— The name of the digit manipulation operation to perform:
szOperation
stripLead, stripTrail, replace, prepend, append.
— A value used by the operation, either the string of digits to
szValue
prepend, append, replace with, or the number of digits to strip.
Example: This example command creates, for destination route 3,
entry 1, an operation numbered 1, with the associated function
stripLead, and an argument of 1, indicating that the command removes
(strips) one leading digit from the dialed number before dialing.
DestinationRouteOperation Create 3 1 1 stripLead 1
ExtensionLength Syntax
ExtensionLength nExtensionLength
Description The length of extension numbers for system devices. The
default is 4 for V3000, V3001R, and V5000 systems. The default is 3 for
NBX 100 systems.