Modifying A Telephone - 3Com 3C10402B Administrator's Manual

For each telephone that you want to autodiscover:
1 Remove the telephone from the packing box.
2 Connect the telephone to power and the network according to the
instructions in the telephone packing sheet or the NBX Installation Guide.
3 Wait until an extension number displays in the telephone's display panel.
Devices that require a license, such as the 3102 Business Telephone, the
3101 and 3101SP Basic Telephones, and the 3105 Attendant Console, do
not display an extension number until you add the license to the system.
If you have not entered a license for a telephone, its display panel displays
the device's MAC address and a rotating hyphen.
You can now disconnect the telephone and move it to its destination. The
telephone retains its extension and button mappings.
Adding a Telephone Manually
To add a new telephone manually:
1 Click
2 Click
3 Enter the appropriate values in the fields.
See the online Help for more information.
4 Click Apply to configure this telephone.
You can configure additional telephones, if necessary.
5 Click OK.
Modifying a To modify a telephone:
Telephone
1 Click
2 Click the extension of the telephone that you want to modify from the
list.
3 In the Modify window, change the desired fields.
See the online Help for more information about the dialog box fields.
4 Click OK.
Telephone Configuration > Telephones
.
Add
Telephone Configuration > Telephones
Adding, Removing, and Modifying Telephones
.
.
95