Whisperpage Permissions; Using Domains For Whisperpage - 3Com 3C10402B Administrator's Manual

70 C 3: F
HAPTER EATURE
WhisperPage
Permissions
Using Domains For
WhisperPage
S
ETTINGS
the CoS function. You can configure the mapped buttons from the
Button Mapping window. Click Telephone Configuration > Telephones or
Telephone Configuration > Telephone Groups. Click a telephone
extension or a telephone group name, depending on which sub menu
you chose, and then click the Button Mapping tab.
Both the manager and the assistant in a WhisperPage session must be
assigned to a WhisperPage domain and have appropriate WhisperPage
access privileges.
Telephone users can view their WhisperPage access privileges from within
the NBX NetSet utility. WhisperPage permissions include this information:
Whether or not the WhisperPage alert tone is enabled
■
The waiting time before an initiated WhisperPage session becomes
■
active
Telephone users (listeners) to whom you can initiate a WhisperPage
■
session
Telephone users (speakers) who can initiate a WhisperPage session
■
with you
You can define these access privileges when you create the WhisperPage
domains.
A domain is a grouping of telephone users who are logically associated in
some way. You create domains for use with the WhisperPage feature.
Each domain must have a unique name, which you configure in the NBX
NetSet utility (click Feature Settings > WhisperPage).
For each domain in the system, configure the following:
The list of members in that domain to whom speakers can whisper.
■
A list of members in that domain who can invoke the WhisperPage
■
feature.
You can create a domain with no members. There can be a maximum of
50 domains in the system. (Some platforms might support fewer domains
due to resource usage.)