Migration - 3Com 3C10402B Administrator's Manual

Migration

Table 20
one system platform to another.
Table 20 Data Migration Platforms and Software Revisions
Source
NBX 100
V3000
V5000
* Must be release R5.0 or higher.
Data Migration Notes and Prerequisites
Before you begin a data migration, make sure you understand these
important prerequisites:
You cannot simply remove the disk drive from one type of system
■
platform and install it into a different platform. If you attempt to do
so, the system will not boot properly.
Licenses are not part of a database migration. The licenses on your old
■
system will not work on the new system. Your new system comes with
its own set of license keys that you must enter into the new system
before you migrate your data.
The target system must be licensed to support the capacities of the
■
source system. For example, you cannot move the data from a V5000
system with 1000 devices successfully onto a V3000 system, unless
you install the memory upgrade and a license to support at least 1000
devices on the V3000 system.
You can choose to include or exclude telephone users' voice mail
■
messages when you perform the data migration.
The system software version on the target system must be equal to or
■
higher than the software version on the source system. For example,
you cannot move data from a release R5.0 system onto an release
R4.3 system using the data migration feature. The target system
software must be at release R5.0 or higher.
describes the supported migration paths to move your data from
*
Target
V5000
V3000
V5000
NBX 100
V3000
NBX 100
Manage Data
Notes
The NBX 100 must be at release
R4.2.X or higher.
The V3000 system must be at
release R4.4.X or higher.
Unsupported.
The V5000 system must be at
release R4.2.X or higher.
Unsupported.
87