Regional Settings - 3Com 3C10402B Administrator's Manual

410 C 17: C
HAPTER OUNTRY

Regional Settings

S
ETTINGS
Table 78 Diagnostic Details (continued)
Values
Not Fully Installed
Error While Loading An error occurred while loading the regional software.
Nothing Installed
After you install regional software and components from the regional
packs, you can enable regional settings. To enable these regional settings
in NetSet, you select the appropriate country and language for the system
voice prompts, the technical tones and cadences, and the online user
documentation.
To enable regional settings, select Country Settings > Regional Settings.
See the online Help for the procedure to enable regional settings.
See "Third-Party Drivers"
install regional language packs.
Advanced Regional Settings
The system also allows you to choose different regional settings for the
system voice prompts, the technical tones and cadences, and the online
user (not administrator) documentation. For example, you might require
local tones and cadences but want the documentation to be in English
and the voice prompts in Australian English.
You can select separate regional settings for:
Voice prompts — The Auto Attendant voice prompts.
■
Documentation — The NBX Telephone Guide, the NBX NetSet user
■
Help, the LabelMaker utility, and the quick reference cards.
Tones and Cadences — The tones and the patterns of rings (cadence)
■
versus silence. Tones and cadences vary from country to country.
Examples:
United States ringing cadence (pattern) is 2 seconds of ring
■
followed by 4 seconds of silence.
Description
The system can access some parts of the regional software,
but not all. You might not have loaded the correct regional
software version for the system software you are running.
Re-install the software.
The system is aware that this regional software exists, but no
version is installed.
on page 368 for information about how to