Understanding The Tool Box Menus; Printer Settings Report; Menu Settings; Printer Information - Dell 2130cn User Manual

Back to Contents Page
Understanding the Tool Box Menus
Printer Settings Report
Printer Maintenance
Diagnosis
The Tool Box allows you to view or specify the printer settings. You can also diagnose the printer settings by using the Tool Box.
The Tool Box consists of the Printer Settings Report, Printer Maintenance, and Diagnosis tabs.
NOTE: A Password dialog box appears the first time you try to change settings on ToolBox when Panel Lock is set on the printer. In this case, input
the password you specified, and click OK to apply the settings.
Printer Settings Report
The Printer Settings Report tab includes the Printer Information, Menu Settings, Reports, Network Settings, and TCP/IP Settings pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Printer Information

Purpose:
To display the printer's system information.
Values:
Dell Service Tag Number
Printer Serial Number
Printer Type
Asset Tag Number
Memory Capacity
Processor Speed
Firmware Version
Network Firmware Version
MCU Firmware Version
Printing Speed (Color)
Printing Speed (Monochrome) Displays the speed for monochrome printing.

Menu Settings

Purpose:
To display the printer's menu settings.
Values:
Downloaded from ManualsPrinter.com Manuals
Displays Dell's service tag number.
Displays the printer's serial number.
Displays the type of printing for the printer. Color Laser is displayed normally.
Displays the printer's asset tag number.
Displays the memory capacity.
Displays the processing speed.
Displays the version of the controller.
Displays the NIC version.
Displays the version of the MCU firmware.
Displays the speed for color printing.
Power Saver Timer Displays the amount of time before the printer enters the power saver timer mode 1 after it finishes a
Mode 1 job.
Power Saver Timer Displays the amount of time before the printer enters the power saver timer mode 2 after it goes into the
Mode 2 power saver timer mode 1.
Displays whether to emit the tone when the operator panel input is correct. Off indicates that the tone is
Control Panel Tone
disabled.
Displays whether to emit the tone when the operator panel input is incorrect. Off indicates that the tone
Invalid Key Tone
is disabled.
Displays whether to emit the tone when the printer becomes ready. Off indicates that the tone is
Machine Ready Tone
disabled.
Job Complete Tone Displays whether to emit the tone when a job is complete. Off indicates that the tone is disabled.
Fault Tone Displays whether to emit the tone when a job ends abnormally. Off indicates that the tone is disabled.
Alert Tone Displays whether to emit the tone when a problem occurs. Off indicates that the tone is disabled.
Out of Paper Alert Displays whether to emit the tone when the printer runs out of paper. Off indicates that the tone is
Tone disabled.
Displays whether to emit the tone when the toner or some other consumable is low. Off indicates that
Low Toner Alert Tone
the tone is disabled.