IBM JS20 - BladeCenter - 8842 Installation And User Manual page 70

Checkpoint code Description
E1D3 Reserved
E1D4 Reserved
E1DB Reserved
E1DC Reserved
E1F0 Start the out-of-box-experience
function.
E1F1 Begin the self-test sequence on
startup devices.
E1F2 Reserved
E1F3 Reserved
E1F4 End the self-test sequence on startup
devices.
E1F5 Build the boot list.
E1F6 Determine the startup-device
sequence.
E1F7 No startup image located.
E1F8 Build the boot list for SCSI adapters.
The location of the SCSI adapter
being scanned is also displayed.
E1F9 Build the boot list for Fibre Channel
adapters. The location of the storage
area network (SAN) adapter being
scanned is also displayed.
E1FA Reserved
58
BladeCenter JS20 Type 8842: Installation and User's Guide
Suggested action
Have the blade server serviced.
Have the blade server serviced.
Have the blade server serviced.
Have the blade server serviced.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Have the blade server serviced. Contact a service
support representative for assistance.
Have the blade server serviced. Contact a service
support representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Make sure that the boot list is applicable by using
the management-module boot list menu.
2. Perform the system checkout procedure. See
"System checkout" on page 48.
3. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
See the BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Have the blade server serviced.