IBM JS20 - BladeCenter - 8842 Installation And User Manual page 66

Checkpoint code Description
E15F Adapter vital product data (VPD)
evaluation.
E170 Beginning of the PCI bus probe.
E172 First pass of the PCI device probe.
E174 Establishing the host connection.
E175 Boot Internet protocol (BOOTP)
request.
E176 Trivial file transfer protocol (TFTP) file
transfer.
54
BladeCenter JS20 Type 8842: Installation and User's Guide
Suggested action
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Make sure that the Boot Internet protocol (BOOTP)
server is configured for this client. Correct any
BOOTP server problems; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. Perform the system checkout procedure. See
"System checkout" on page 48.
4. If there are no problems with the BOOTP server or
the network connection, replace the system-board
assembly. Contact a service support representative
for assistance.
1. Make sure that the BOOTP server is correctly
configured for this client. Correct any BOOTP server
problems; then, retry the operation.
2. Make sure that network connections are correct;
then, retry the operation.
3. Perform the system checkout procedure. See
"System checkout" on page 48.
4. If there are no problems with the BOOTP server or
the network connection, replace the system-board
assembly. Contact a service support representative
for assistance.
1. Make sure that the blade server is correctly
configured; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. If there are no problems with the BOOTP server or
the network connection, replace the system-board
assembly. Contact a service support representative
for assistance.