IBM JS20 - BladeCenter - 8842 Installation And User Manual page 15

v BladeCenter JS20 Type 8842 Hardware Maintenance Manual and
Troubleshooting Guide: This document contains the information to help you solve
BladeCenter JS20 problems, and contains information for service technicians.
The following related documentation is available in PDF on the World Wide Web or
on the IBM BladeCenter unit Documentation CD that comes with the BladeCenter
unit:
v BladeCenter unit Installation and User's Guide: This document contains
instructions for setting up and configuring the BladeCenter unit and basic
instructions for installing some options in the BladeCenter unit. It also contains
general information about the BladeCenter unit.
v BladeCenter unit Hardware Maintenance Manual and Troubleshooting Guide:
This document contains the information to help you solve BladeCenter unit
problems yourself, and it contains information for service technicians.
v BladeCenter unit Rack Installation Instructions: This document contains
instructions for installing the BladeCenter unit in a rack.
v BladeCenter and BladeCenter T Management Module User's Guide: This
document contains instructions for installing, starting, configuring, and using the
BladeCenter management module. This document also provides general
information about the management module and contains a description of the
management module features.
v BladeCenter and BladeCenter T Management Module Command-Line Interface
Reference Guide: This document contains instructions for installing, starting,
configuring, and using the IBM BladeCenter management-module command-line
interface. This document also provides general information about the
BladeCenter management-module command-line interface and contains a
description of its features.
v BladeCenter unit Management Module Installation Guide: This document
contains instructions for installing, setting up, starting, and configuring the
BladeCenter management module.
v BladeCenter and BladeCenter T Serial Over LAN Setup Guide: This document
contains instructions for establishing a Serial Over LAN (SOL) connection,
enabling the SOL feature, and configuring the blade server so that you can run
SOL sessions and use the IBM BladeCenter management-module command-line
interface. This document also contains instructions for updating and configuring
BladeCenter components for SOL operation using the management-module
Web-based management and configuration program.
v IBM 4-Port Gb Ethernet Switch Module for BladeCenter Installation and User's
Guide: This document contains instructions for setting up, installing, and
configuring the IBM 4-Port Gb Ethernet Switch Module for BladeCenter and a
description of the switch-module features.
v Nortel Networks Layer 2-7 GbE Switch Module for IBM BladeCenter Installation
Guide: This document contains instructions for setting up, installing, and
configuring the Nortel Networks Layer 2-7 GbE Switch Module for IBM
BladeCenter and a description of the switch-module features.
v Cisco Systems Gigabit Ethernet Switch Module for IBM BladeCenter Installation
Guide: This document contains instructions for setting up, installing, and
configuring the Cisco Systems Gigabit Ethernet Switch Module for IBM
BladeCenter and a description of the switch-module features.
v Installing AIX 5L 5.2 - IBM BladeCenter JS20: This document contains
instructions for installing AIX 5L 5.2 on an IBM BladeCenter JS20.
3
Chapter 1. Introduction