IBM JS20 - BladeCenter - 8842 Installation And User Manual page 67

Checkpoint code Description
E177 Transfer failure due to a TFTP error
condition.
E17B Microprocessor clock-speed
measurement.
E191 Create an industry standard
architecture (ISA) reserved node.
E19A NVRAM auto-boot? variable not
found - assume FALSE.
E19B NVRAM menu? variable not found -
assume FALSE.
E19D Create the NVRAM node.
E19E Real-time-clock initialization.
E1A0 Reserved - open firmware function.
E1A1 The user requested startup to the
open firmware prompt that was
initiated by a keyboard entry.
Suggested action
1. Make sure that the BOOTP server is correctly
configured; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. Perform the system checkout procedure. See
"System checkout" on page 48.
4. If there are no problems with the BOOTP server or
the network connection, replace the system-board
assembly. Contact a service support representative
for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Chapter 7. Solving problems
55