IBM JS20 - BladeCenter - 8842 Installation And User Manual page 63

Checkpoint code Description
D104 The model field has been found to be
blank.
D105 The machine type has been entered.
D106 The universal unique identifier (UUID)
universal is blank; the new value has
been calculated and the field has
been updated.
D5BB There is a startup delay with the
countdown for overriding or modifying
the startup behavior.
E101 Create a run-time abstraction service
(RTAS) node.
E102 Load and initialize the RTAS.
E105 Transfer control to the operating
system (normal mode startup).
E10A Load the RTAS device tree.
E10B Set the RTAS device properties.
E130 Build the device tree.
Suggested action
1. Enter a valid machine model. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
This error indicates that you might have a problem with
the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
v Perform the system checkout procedure. See
"System checkout" on page 48.
v See BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Chapter 7. Solving problems
51