1
Ethernet adapter
2
Ethernet adapter connector
3
Adapter bracket
7. If you are instructed to return the Ethernet adapter, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Installing the optional two-port Ethernet adapter
To install the Ethernet adapter, complete the following steps:
1. Read the safety information in Chapter 2 "Safety information" on page 3 and "Installation guidelines"
on page 67.
2. Remove the cover (see "Removing and replacing the cover" on page 72).
3. Touch the static-protective package that contains the Ethernet adapter to any unpainted metal surface on
the server. Then, remove the Ethernet adapter from the package.
4. Remove the Ethernet adapter filler panel on the rear of the chassis (if it has not been removed already).
5. Attach the Ethernet adapter bracket to the Ethernet adapter (if the bracket is not already installed on
the system board).
6. Align the adapter with the Ethernet adapter connector on the system board.
1
Ethernet adapter filler panel
2
Ethernet adapter
3
Adapter bracket
4
Ethernet adapter connector
122
ThinkServer RD210 Hardware Maintenance Manual