Lenovo ThinkServer RD210 Hardware Maintenance Manual page 133

1
Microprocessor 2 air baffle
2
Battery retention clip
3
Battery
4
Release tab
5. Disconnect the remote battery cable from the remote battery cable connector on the battery carrier
and lift the battery and battery carrier from the slot. See the following illustration for the location of
the connectors on the battery carrier.
1
Battery cable
2
Remote battery cable connector
3
Battery
4
Battery carrier
5
Battery connector
6. Disconnect the battery cable from the battery cable connector on the battery carrier.
7. Remove the three screws that attaches the battery carrier to the battery and remove the battery from
the battery carrier.
Note: If your battery
battery carrier to remove the battery from the battery carrier.
1 and battery carrier 2
.
Chapter 7 Installing optional devices and replacing customer replaceable units
are attached with a clip, squeeze the clip on the side of the
125