Lenovo ThinkServer RD210 Hardware Maintenance Manual page 101

1
USB embedded connector
2
RAID controller connector
3
Riser card error LED
4
SAS/SATA RAID riser card
6. Insert the SAS/SATA controller
until it is firmly seated.
Attention: Incomplete insertion might cause damage to the server or the controller.
7. Tilt the SAS/SATA RAID riser-card assembly slightly and insert the end of the adapter in the slot on the
retention bracket as shown in the following illustration. Make sure that the SAS/SATA RAID riser-card
assembly keys align correctly with the connector on the system board and press down on the assembly
until it is seated firmly into the connector on the system board.
2
into the connector on the SAS/SATA RAID riser card assembly
.
Chapter 7 Installing optional devices and replacing customer replaceable units
1
93