Framed Panels - Sub-Zero BI-36UFD Design Manual

Built-In Refrigeration

Framed Panels

If the thickness of the custom panels is less than
they must be backed up with a sheet of shim material to
build the total thickness to
1
than / " , a routed edge must be provided around the
(6)
4
panel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE: For framed design applications,
routing, recessing or optional extended handles may be
required on raised panels for finger clearance under the
handle. Refer to the full-scale templates at the end of this
section.
IMPORTANT NOTE: Do not cover a glass door with a solid
panel. Also, the edges of the window cut-out will need to
be finished, as they will be exposed.
IMPORTANT NOTE: When installing two units in a side-by-
side application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
1
/
1
/ " . If the panel is thicker
(6)
4
" ,
(6)
4
TRIM
REVEAL
1
/ "
4 (6) min
1
/ "
4 (6)
PANEL
1
Panels / "
4
MAIN FRAME
TRIM
REVEAL
1
/ "
4 (6) min
ROUT TO
1
/
DOOR 4
thick or less. Panels thicker than
(6)
13
subzero.com/specs
MAIN FRAME
"
(6) DOOR
1
/ " .
(6)
4