Recognition Systems HANDKEY II Manual page 48

Service Menu
Calibrate
Status Display
Network Status
Calibrate The Calibrate command verify that the HandReader's exposure values are within
normal operating parameters. The normal operating parameters are shown in
Table 8.
Table 8: Normal Operating Parameters
Row "r"
Column "c"
Exposure
Status Display The status display command allows you to enable or disable the displaying of
the following information.
•
•
Figure 9-1 on page 47 identifies each status display field value.
Page 46
Table 7: Service Command Menu
Service Menu
Password = 1
Recal (N/Y)
On/Off (Y/N)
a
Status Information
a. Master controller only.
Parameter
0 +/- 2
0 +/- 2
100 +/- 20
the status values of HandReader inputs and outputs
the hand read score of the last user to verify on the HandReader
Normal Range