Programming The Handreader - Recognition Systems HANDKEY II Manual

Programming the HandReader

The HandReader is programmed via a series of command menus. A summary of
the menus and commands is given in Table 6.
Service Menu
Password 1
Calibrate Set Language
Status Display Set Date Format
Network Status* Set Time
and Date
Set Address
Set ID Length
Set Output Mode
Set Facility
Lock/Shunt Time
Aux Out Control
Set Reader Mode
Set Serial
Set Duress Code
Print Options
Set Beeper
Upgrade
* These menu options only appear in HandReaders configured as a "Master"
unit.
To control access to the command menus, each menu has a unique password.
This password is requested as a part of the process for accessing each menu. A
supervisor must enter the correct password for that menu to access that menu.
The default menu passwords are given in Table 6.
Table 6: Basic Command Mode Structure
Setup Menu Management
Password 2 Password 3
List Users
Data From
Network*
Data to
Network*
Enrollment
Menu Menu
Password 4
Add User
Add/Remove
User
HandKey II Manual
Security Menu
Password 5
Set User Data
Set TZ Table
Reject
Threshold
Set Passwords
Clear Memory
Special Enroll
Page 41