Erasing The Memory - Recognition Systems HANDKEY II Manual

Erasing the Memory

There are two options when erasing the memory of the HandReader.
1. Setup
2. All
The erasing of the setup will set the HandReader's address, passwords, etc.
back to factory defaults.
Choosing the All option will take the HandReader's setup back to factory defaults
plus erase all user databases and datalogs. This action can not be undone. If
there is a software that is managing the system then the users can be
downloaded back to the HandReader if needed.
Erasing The erase memory function allows a HandReader's setup and/or user database
HandReader to be erased.
Memory Perform the following steps to erase the setup programs but retain the user
database.
1. With system power OFF, depress reset switch.
2. Turn system power ON and wait 5 seconds.
3. LCD screen will display
ERASE :1 SETUP
:9 ALL!!!
HandKey II Manual
Page 35