2. Gently pull open the lever.
The drive carrier or drive blank unlocks.
3. If the enclosure is powered on, allow the disk drive to fully spin down (wait
approximately 15-20 seconds).
Warning: Removing a populated disk drive carrier before it has fully spun down may result in disk
drive damage and possible personal injury.
4. Gently pull the disk drive carrier or drive blank out of the enclosure.
5. Immediately replace the disk drive carrier assembly or install a drive blank
assembly to maintain correct airflow and cooling. For more information on
installing disk drives, see
36
Figure 26. Pushing the Button on the Assembly
Figure 27. Drive Carrier Unlocked
"Installing the Disk Drives" on page
®
Intel
Server System SR2612UR Service Guide
33.