The NIC LEDs at the right and left of each NIC provide the following information.
LED
Left
Right
Hot-Swap Backplane
The Intel
SR2520SAXSR supports a backplane. The backplane provides the platform support for
peripheral drives and hot-swap SAS or SATA hard drives. To eliminate several cables, the
backplanes are also used as a pathway for signals from the server board to various
platform interconnects, including those for the control panel and peripheral drives. The
backplane acts as a 'pass-through' for the SAS/SATA data from the drives to the SATA
controller on the server board or a SAS/SATA controller add-in card. It provides the
physical requirements for the hot-swap capabilities.
Note: The Intel
SATA cables installed. The Intel
an active backplane with 2 SAS cables installed.
14
Table 3. NIC LED Descriptions
LED State
Off
Solid Amber
Blinking Amber
Off
Solid Amber
Solid Green
®
Server System SR2520SAX/SR2520SAXS and SR2520SAXR/
Figure 10. Hot-Swap Backplane
®
Server System SR2520SAX/SR2520SAXR ships with a passive backplane with 6
No network connection
Network connection in place
Transmit/receive activity
10 Mbps connection (if left LED is on or blinking)
100 Mbps connection
1000 Mbps connection
AF001531
®
Server System SR2520SAXS/SR2520SAXSR ships with
®
Intel
Server System SR2520SA User's Guide
Description