Table of Contents
Advertisement
7. Position the replacement fan so the connector on the fan is at the right and pointing
down.
8. With the fan oriented correctly, insert the fan into the fan module, and secure the
fan with two screws as shown.
9. Lower the fan module into the server system (see letter "A" in the figure below)
and secure the module with four screws as shown (see letter "B").
10. Connect the fan cables to the server board (see letter "C" in the figure below).
®
Intel
Server System SR2520SA User's Guide
Figure 51. Removing a Fan from the Fan Module
Figure 52. Installing a Fan into the Fan Module
AF001463
AF001464
61
Advertisement
Table of Contents
