Installing And Removing Memory; Installing Dimms - Intel SR2520SAFRNA - Server System - 0 MB RAM User Manual

Installing and Removing Memory

The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1,
DIMM B2, DIMM C1, DIMM C2, DIMM D1 and DIMM D2 starting from the center of
the board. See "Memory" for a discussion of the memory requirements and options. See
"Server System References"
Note: The Intel

Installing DIMMs

To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord(s) from the server.
4. Remove the system's cover. For instructions, see
5. Locate the DIMM sockets (see
®
Intel Server System SR2520SA User's Guide
for a link to the list of tested DIMMs.
®
Server System SR2520SAF/SR2520SAFR only has four DIMM sockets.
"Safety Information".
"Removing the System
Figure 21).
Cover".
31