Removing The Optical Drive; Figure 34. Installing Optical Drive And Drive Bracket Into Server System - Intel SR2520SAFRNA - Server System - 0 MB RAM User Manual

Figure 34. Installing Optical Drive and Drive Bracket into Server System

11. Reinstall the front panel board. For instructions, see
Board".
12. Obtain the cable from the accessory kit and install the cable to the drive and the
server board.
13. Install the server system cover. For instructions, see
14. (Optional) Install the front bezel. For instructions, see
15. Plug all peripheral devices and the AC power cable(s) into the server.

Removing the Optical Drive

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the front bezel if it is installed. For instructions, see
Bezel".
4. Remove the server system cover. For instructions, see
Cover".
5. Remove the front panel. For instructions, see
6. Remove the four screws holding the drive bracket to the server system (see letter
"A" in the figure below), and remove the bracket from the system (see letter "B" in
the figure below).
46
A
B
AF001828
"Replacing the Front Panel
"Installing the System
"Installing the Front
"Removing the Front
"Removing the System
"Replacing the Front Panel
®
Intel Server System SR2520SA User's Guide
Cover".
Bezel".
"Safety
Board".