Table of Contents
Advertisement
Obtaining the Upgrade
Download the BIOS image file to a temporary folder on your hard drive. See
System References"
Note: Review the instructions and release notes that are provided in the readme file distributed
with the BIOS image file before attempting a BIOS upgrade. The release notes contain
critical information regarding jumper settings, specific fixes, or other information to
complete the upgrade.
Upgrading the BIOS
Follow the instructions in the readme file that came with the BIOS upgrade. When the
update completes, remove the bootable media from which you performed the upgrade.
Caution: Do not power down the system during the BIOS update process! The system will reset
automatically when the BIOS update process is completed.
Note: You may encounter a CMOS Checksum error or other problem after reboot. If this
happens, shut down the system and boot it again. CMOS checksum errors require that you
enter Setup, check your settings, save your settings, and exit Setup.
Clearing the Password
If the user or administrator password(s) is lost or forgotten, moving the password clear
jumper into the "clear" position clears both passwords. The password clear jumper must
be restored to its original position before a new password(s) can be set.
1. Power down the system and disconnect the AC power.
2. Open the server chassis.
3. Move the jumper from the normal operation position, Password Clear Protect, at
pins 1 and 2 to the Password Clear Erase position, covering pins 2 and 3.
CMOS
CLR
2
3
J1J1
68
for a link to the update software.
PASSWORD
CLR
Default
Default
2
CLEAR
CLEAR
CMOS
PASSWORD
3
J1J2
Figure 56. Clear Password Jumper
®
Intel
Server System SR2520SA User's Guide
"Server
AF000187
Advertisement
Table of Contents
