Input/Output Ports; Audio Connectors - IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

Input/output ports

Connect optional external devices to the connectors on the front and rear of the
server.
Your server has the following input/output (I/O) connectors:
v Three audio (line-in, line-out, and microphone)
v One auxiliary-device (pointing-device)
v One Ethernet (RJ-45)
v One keyboard
v One parallel
v Two serial
v One Ultra320 SCSI (some models)
v Four Universal Serial Bus (USB) v 2.0
v One video
The following illustration shows the locations of these connectors.
Power cord
connector
Mouse
Keyboard
USB 2
USB 1
Serial 1
Parallel
Serial 2
Ethernet
Line out (green)
Line in (blue)
Mic (pink)
Video
SCSI knockout
The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter II (system-management
adapter) installed in PCI slot 1, your server also has an additional Ethernet
connector, an additional serial connector, and an Advanced System Management
(ASM) Interconnect connector. See the documentation that comes with the Remote
Supervisor Adapter II for more information about the ASM Interconnect network.

Audio connectors

Use the audio connectors to connect external audio equipment to the server. The
following illustration shows the audio connectors.
Line out (green)
Line in (blue)
Mic (pink)
Chapter 4. Installing options
69