Input/Output Connector Locations And Ports; Serial Port - IBM eServer 130 xSeries User Reference Manual

Input/output connector locations and ports

The following illustrations show the input/output connectors and the expansion slots
on the rear of the appliance server. Your appliance server has the following
input/output (I/O) connectors:
•
•
•
•
•
•
•
•
Figure 26. Identifying the connectors on the model 8654
Figure 27. Identifying the connectors on the model 8672

Serial port

Your appliance server has one standard serial port. Some application programs
require specific ports, and some modems function properly only at certain serial port
addresses. Use the Configuration/Setup Utility program to change the port address
assignments and prevent conflicts.
74
IBM xSeries 130: User's Reference
Serial connector
Universal Serial Bus (USB) connectors
Ethernet connectors
Cable Chaining Technology (C2T) connectors (model 8654 only)
Advanced System Management (ASM) connectors (model 8654 only)
Keyboard connector (model 8672 only)
Video connector (model 8672 only)
Auxiliary-device (pointing device) connector (model 8672 only)
Ethernet 1
Power
Ethernet 2
Ethernet 1 connector
Ethernet 2 connector
Advanced System
Management (RS-485) connectors
USB Connector 2
USB Connector 1
Mouse or auxiliary
pointing device connector
Keyboard connector
USB 2 Serial
connector
USB 1
C2T (Out) connector
Serial connect
C2T (In) connect
Video
connector