Front Fan - IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

Front fan

Before you begin:
v Read "Safety information" on page 129
v Review the information in "System reliability considerations" on page 33
To remove the front fan, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server, and disconnect the power cord; then, disconnect all external
3. Remove the side cover. See "Removing the side cover" on page 36
4. Remove the frame-support bracket. See "Removing and installing the support
5. Remove the fan cable from the system board.
6. Remove the adapter-support bracket and fan housing.
7. Use side cutters to cut the four rubber extensions on the adapter-support
cables.
bracket" on page 38
bracket.
Chapter 5. Field replaceable units
83