Chapter 3. Input/Output Ports; Audio Connectors - IBM xSeries 225 8647 Installation Manual

Chapter 3. Input/output ports

Connect optional external devices to the connectors on the front and rear of the
server.
Your server has the following input/output (I/O) connectors:
v Three audio (line-in, line-out, and microphone)
v One auxiliary-device (pointing-device)
v One Ethernet (RJ-45)
v One keyboard
v One parallel
v Two serial
v One Ultra320 SCSI (some models)
v Four Universal Serial Bus (USB) v 2.0
v One video
The following illustration shows the locations of these connectors.
Power cord
connector
Mouse
Keyboard
USB 2
USB 1
Serial 1
Parallel
Serial 2
Ethernet
Line out (green)
Line in (blue)
Mic (pink)
Video
SCSI knockout
The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter (system-management adapter)
installed in PCI slot 1, your server also has an additional Ethernet connector, an
additional serial connector, and an Advanced System Management (ASM)
Interconnect connector. See the documentation that comes with the Remote
Supervisor Adapter for more information about the ASM Interconnect network.

Audio connectors

Use the audio connectors to connect external audio equipment to the server. The
following illustration shows the audio connectors.
Line out (green)
© Copyright IBM Corp. 2003
Line in (blue)
Mic (pink)
43