Diskette Drive; System Reliability Considerations - IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

Diskette drive

Before you begin:
v Read "Safety information" on page 129
v Review the information in "System reliability considerations" on page 33
To remove the diskette drive, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server, and disconnect the power cord; then, disconnect all external
cables.
3. Remove the side cover. See "Removing the side cover" on page 36
4. Disconnect the cables.
5. Remove the two screws from the diskette drive cage.
6. Gently slide the diskette drive toward the front of the server and lift it out.
To replace the diskette drive, reverse the steps.
95
Chapter 5. Field replaceable units