To replace the bezel-release latch, complete the following steps:
1. Align the bezel-release latch with the slots on the underside of the top of the
2. Replace the CD-ROM drive. See "Installing a 5.25-inch removable-media drive"
3. Replace the front bezel. See "Replacing the bezel" on page 66
4. Replace the side cover. See "Replacing the side cover" on page 67
5. Connect all external cables; then, connect the power cord, and plug in the
6. Turn on the server.
98
IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide
chassis, and slide it into place.
on page 51 for instructions.
server.