IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual page 114

Error Code/Symptom
005-XXX-000 (Failed Video test)
011-XXX-000 (Failed COM1 Serial Port
test)
011-XXX-001 (Failed COM2 Serial Port
test)
014-XXX-000 (Failed Parallel Port test)
015-XXX-001 (USB interface not found,
board damaged)
015-XXX-198 (USB device connected
during USB test)
020-XXX-000 (Failed PCI Interface test)
030-XXX-000 (Failed Internal SCSI
interface test)
035-XXX-099
035-XXX-S99 (Failed RAID test on PCI slot
S, check System Error Log before replacing
a FRU)
035-XXX-SNN (Check System Error Log
before replacing a FRU, NN = SCSI ID of
failing fixed disk)
035-253-S99 (RAID adapter initialization
failure)
089-XXX-001 (Failed Microprocessor test)
089-XXX-002 (Failed Optional
Microprocessor test)
104
IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide
FRU/Action
1. Video adapter
2. System Board
1. Check loopback plug connected to externalized serial port.
2. Check cable from externalized port to system board. Should
connect to Serial Port A on the system board (J52).
3. System Board.
1. Check loopback plug connected to externalized serial port.
2. Check cable from externalized port to system board. Should
connect to Serial Port B on the system board (J51).
3. System Board.
System board
System board
1. Remove USB devices from USB1 and USB2.
2. System Board
.
System board
System board
1. Integrated RAID function on system board is damaged.
2. No RAID adapters were found.
3. If adapter is installed re-check connection.
1. RAID Adapter
2. SCSI Backplane
3. Cable
Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
1. ServeRAID Adapter in slot S is not configured properly. Obtain the
basic and extended configuration status and refer to the ServeRAID
Hardware Maintenance Manual for more information.
2. Cable.
3. SCSI Backplane.
4. Adapter.
1. Microprocessor 1
2. System Board
1. Microprocessor 2
2. System Board